Zoom
PRODUCT INFORMATION
Design:
The entering end is conically tapered, which holds the flute open even with the die bearing against the face of the workpiece.
- the chips always flow away freely.
- with dimple and notch on the outside diameter to lock in place.
- with spiral point from M3
Use:
For tapping on automatic machines and in cases where the thread has to be cut close to a shoulder.
The entering end is conically tapered, which holds the flute open even with the die bearing against the face of the workpiece.
- the chips always flow away freely.
- with dimple and notch on the outside diameter to lock in place.
- with spiral point from M3
Use:
For tapping on automatic machines and in cases where the thread has to be cut close to a shoulder.
Documentation
TABULAR PRODUCT DATA
| Item no. | M2X16X8 |
| Material | HSS |
| Total length mm | 8 |
| Field of application (material to be processed) | P |
| Type | Glockenform |
| Cutting direction | rechts |
| Body diameter mm | 16 |
| Total length mm | 8 |
| Toleranzfeld | 6g |
| Surface | HSS |
| Nominal thread diameter metric | M2 |
| d1 metric | M2 |
| Thread pitch mm | 0,4 |
| Flank angle | 60 |
| Standard of the thread | DIN 13 |
| Thread type | M |
| Nominal thread diameter | M2 |
| A21 metric | M2 |
| B3 mm | 8 |
| A3 | 0,4 |
| A7 mm | 16 |
| Lapped | FALSE |
| Spiral point | TRUE |
| D mm | 16 |
| Nominal thread diameter metric | M2 |
| Total length mm | 8 |
| Surface | HSS |
| Total length mm | 8 |
| Thread type | M |
| D mm | 16 |
| Nominal thread diameter metric | M2 |
| Total length mm | 8 |
| Thread pitch mm | 0,4 |
| Cutting direction | rechts |
RELATED PRODUCTS
