Zoom
PRODUCT INFORMATION
Specification:
- for right and left rotation
- compact construction, short length
- runout 0.05 mm, max. perm. speed 7,000 rpm-1
- high holding torque (through bevel gear) laterally clamped with hex T-key
- holding torque at 15 Nm starting torque 30 N/m - 35 N/m
- holding torque at 20 Nm starting torque 70 N/m - 80 N/m
- - tool change possible directly in the machine (with the machine spindle at standstill)
- brief clamping and changeover times
Design:
Steep taper shank similar to DIN 2080 with thread for manual clamping and ring groove for automatic clamping (e.g. Maho, Deckel, Mikron).
Use:
Only for drilling and countersinking in NC machines, slowly rotating machines and for older machinery
Delivery:
Chuck with hexagonal T-key, operating manual and test report
Balancing:
NC drill chucks 240062 cannot be balanced
- for right and left rotation
- compact construction, short length
- runout 0.05 mm, max. perm. speed 7,000 rpm-1
- high holding torque (through bevel gear) laterally clamped with hex T-key
- holding torque at 15 Nm starting torque 30 N/m - 35 N/m
- holding torque at 20 Nm starting torque 70 N/m - 80 N/m
- - tool change possible directly in the machine (with the machine spindle at standstill)
- brief clamping and changeover times
Design:
Steep taper shank similar to DIN 2080 with thread for manual clamping and ring groove for automatic clamping (e.g. Maho, Deckel, Mikron).
Use:
Only for drilling and countersinking in NC machines, slowly rotating machines and for older machinery
Delivery:
Chuck with hexagonal T-key, operating manual and test report
Balancing:
NC drill chucks 240062 cannot be balanced
Documentation
TABULAR PRODUCT DATA
| C2 | SK50 |
| Mounting size_ machine side [C2/CZCMS] | SK50 |
| Overhang length mm | 160 |
| B3 mm | 160 |
| C71 mm | 8 |
| A1 mm | 28 |
| Balancing | 22000 |
RELATED PRODUCTS
