Design:- forged, milled guide faces, thread rolled- M8 - M12 tempered to strength class 10.9- M14 - M24 tempered to strength class 8.8- with hex nut DIN 6330 B- extra thick washer DIN 6340 hardened

Design:- forged, milled guide faces, thread rolled- M8 - M12 tempered to strength class 10.9- M14 - M24 tempered to strength class 8.8- with hex nut DIN 6330 B- extra thick washer DIN 6340 hardened

Design:- forged, milled guide faces, thread rolled- M8 - M12 tempered to strength class 10.9- M14 - M24 tempered to strength class 8.8- with hex nut DIN 6330 B- extra thick washer DIN 6340 hardened

Design:- forged, milled guide faces, thread rolled- M8 - M12 tempered to strength class 10.9- M14 - M24 tempered to strength class 8.8- with hex nut DIN 6330 B- extra thick washer DIN 6340 hardened

Design:- forged, milled guide faces, thread rolled- M8 - M12 tempered to strength class 10.9- M14 - M24 tempered to strength class 8.8- with hex nut DIN 6330 B- extra thick washer DIN 6340 hardened

Design:- forged, milled guide faces, thread rolled- M8 - M12 tempered to strength class 10.9- M14 - M24 tempered to strength class 8.8- with hex nut DIN 6330 B- extra thick washer DIN 6340 hardened

Design:- forged, milled guide faces, thread rolled- M8 - M12 tempered to strength class 10.9- M14 - M24 tempered to strength class 8.8- with hex nut DIN 6330 B- extra thick washer DIN 6340 hardened

Design:- forged, milled guide faces, thread rolled- M8 - M12 tempered to strength class 10.9- M14 - M24 tempered to strength class 8.8- with hex nut DIN 6330 B- extra thick washer DIN 6340 hardened

Design:- annealed, with female thread, strength class 10- made of tempered steel 0.35-0.45% C- for the production of sliding blocks with non-standard thread- full loadability of the T-slot nuts will only be achieved by screwing the entire thread length together-...

Design:- annealed, with female thread, strength class 10- made of tempered steel 0.35-0.45% C- for the production of sliding blocks with non-standard thread- full loadability of the T-slot nuts will only be achieved by screwing the entire thread length together-...

Design:- annealed, with female thread, strength class 10- made of tempered steel 0.35-0.45% C- for the production of sliding blocks with non-standard thread- full loadability of the T-slot nuts will only be achieved by screwing the entire thread length together-...

Design:- annealed, with female thread, strength class 10- made of tempered steel 0.35-0.45% C- for the production of sliding blocks with non-standard thread- full loadability of the T-slot nuts will only be achieved by screwing the entire thread length together-...