Zoom
PRODUCT INFORMATION
Design:
- for contactless and sparing extraction of bearings etc.
- prevents pressure damages on the bearings
- also usable in confined working space, as no support area is needed
- for extracting a bearing with a slide hammer, an internal extractor, series 21, is obligatory
- slide hammer devices can be used where threaded pins are screwed directly into the parts to be removed
- by pulling back the slider, the part to be extracted is driven out
- ergonomically shaped, solid slider for optimal power transmission
- when sliding back, the slide bar completely disappears into the slider so that bruises and abrasions of the hand are avoided
- the threaded pins are interchangeable
- stroke length 220 mm
- in plastic case
Use:
For extracting internal ball bearings, ball bearing outer rings and bushings For extracting parts with centre threaded holes, e.g. taper pins and cylinder pins
- for contactless and sparing extraction of bearings etc.
- prevents pressure damages on the bearings
- also usable in confined working space, as no support area is needed
- for extracting a bearing with a slide hammer, an internal extractor, series 21, is obligatory
- slide hammer devices can be used where threaded pins are screwed directly into the parts to be removed
- by pulling back the slider, the part to be extracted is driven out
- ergonomically shaped, solid slider for optimal power transmission
- when sliding back, the slide bar completely disappears into the slider so that bruises and abrasions of the hand are avoided
- the threaded pins are interchangeable
- stroke length 220 mm
- in plastic case
Use:
For extracting internal ball bearings, ball bearing outer rings and bushings For extracting parts with centre threaded holes, e.g. taper pins and cylinder pins
Documentation
TABULAR PRODUCT DATA
| Contents | M3 | M4 | M5 | M6 | M8 | M10 KS-22-01-GH = M12 verzinkt: M7 | M10 | 15-16G |
| Item no. | KS-22-01 |
RELATED PRODUCTS
