Zoom
PRODUCT INFORMATION
Design and use:
- can be operated by either compressed air through the integrated Venturi nozzle or by use of an external vacuum pump
- low air consumption
- several suction openings, therefore flexible partition of the panel and clamping of several pieces possible
- vacuum plates can be combined
- high retaining power
- universally applicable
- high friction coefficient for safe clamping of unmachined workpiece surfaces
- sealing cords compensate minor unevenesses on the workpiece surface
- distortion and vibration free 5-sided machining
Note:
- operation with dried, filtered and unlubricated compressed air
- max. suction volume to atmosphere 21.8 l/min
- operating pressure for max. suction volume 3.5 bar
Technical data:
- operating pressure 3 to 6 bar
- max. vacuum 93 %)
- hight clamping plate 40 mm
- number of suction points 3 (only at 300 × 200 mm) to 9
Delivery:
- base plate made of high-strength aluminium
- integrated Venturi nozzle and integrated muffler
- vacuum gauge and stop valve
- 6 eccentric stops and 2 m pneumatic hose
- plug nipple for compressed air connection and 10 m sealing cord with 4.5 mm Ø
- can be operated by either compressed air through the integrated Venturi nozzle or by use of an external vacuum pump
- low air consumption
- several suction openings, therefore flexible partition of the panel and clamping of several pieces possible
- vacuum plates can be combined
- high retaining power
- universally applicable
- high friction coefficient for safe clamping of unmachined workpiece surfaces
- sealing cords compensate minor unevenesses on the workpiece surface
- distortion and vibration free 5-sided machining
Note:
- operation with dried, filtered and unlubricated compressed air
- max. suction volume to atmosphere 21.8 l/min
- operating pressure for max. suction volume 3.5 bar
Technical data:
- operating pressure 3 to 6 bar
- max. vacuum 93 %)
- hight clamping plate 40 mm
- number of suction points 3 (only at 300 × 200 mm) to 9
Delivery:
- base plate made of high-strength aluminium
- integrated Venturi nozzle and integrated muffler
- vacuum gauge and stop valve
- 6 eccentric stops and 2 m pneumatic hose
- plug nipple for compressed air connection and 10 m sealing cord with 4.5 mm Ø
Documentation
- AMF Zero point systems
- AMF Hydraulic clamping systems
- AMF Standard clamping systems
- AMF Toggle clamps, manual & pneumatic
- AMF Magnetic clamping systems
- AMF Collet for inside & outside clamping systems
- AMF Hand tools
- AMF Vaccum clamping systems
- AMF Single & mutliple clamping system
- AMF Grippers
- AMF Marking & cleaning tools
- AMF Lean automation
TABULAR PRODUCT DATA
RELATED PRODUCTS
